+
  • PfOfE3EPSMK_Wj8PEuokhA._640xaf.jpg
  • d996af91-2433-486c-89d3-287cadf624e3.jpg
  • 683d9585-4932-4423-8ec8-2c6e0bb26cf8.jpg
  • WeChat-圖片_20170803111001.jpg
  • WeChat-圖片_20170803110952.jpg
  • WeChat-圖片_20170802115819.jpg

Automobile fuel tank spraying production line spraying machine factory powder coating equipment china

Automobile fuel tank spraying production line spraying machine factory powder coating equipment china : 1, the whole production line is highly automated, and only needs a small number of workers, which effectively saves labor costs. 2. Wonderful and accurate surface coating, qualified rate is more than 95%. 3, Spray size can be flexibility controlled, save 25%~35% paint . 4, The production line with more than 15 years service life, and low maintenance and high safety. 5, the whole line design can provide remote monitoring and maintenance. 6, the automatic spraying equipment has high production efficiency, 7/24. Produce 600 thousand sets of fuel tanks per year. 7. Simple spray testing, general in 10 minutes, reduce the time and spray gun conditions digitization Recalling. reduce the dependence on technicians. 8. 100% automation, operate according to the system procedures, reduce labor costs. 9, Environmental protection equipment meets the national environmental VOC emission standards.

Category:

图片名称

Technology at home and abroad

图片名称

Quality assurance

图片名称

Tailored

图片名称

Original purchase


Get quote
  • PRODUCT VIDEO
  • INTRODUCTION
  • PARAMETERS
  • PROCESS FLOW
  • ADVANTAGES
  • SUCCESS CASE
  • FAQ
  •  
    Consist of coating system
     
    1. Mist spray pretreatment system
     
    The general pretreatment as following :degrease→rinse→acid washing to dust removal→surface treatment →anoidizing →water washing →deactivation →rinse→drying
    Function :removing the degrease, dust, rust on the surface of workpiece, and produce a layer Corrosion resistance, adding the adhesion of coating .
     
    2. Powder spray system
     
    Function :powder spray evenly to the workpiece surface, the particular workpiece (including workpiece which easily produce electrostatic shield position)  should be sprayed by a high performance electrostatic spraying machine.
    Spraying process: using the electrostatic adsorption principle, a evenly powder coating on the workpiece surface, powder collected by a recycle system, then screening and separation to be reused.  
     
    3. spraying system
     
    Spraying system consist of manual and robot spraying .
     
    Function :Chuangzhi paint spraying utilize oil spraying chamber, water curtain spraying chamber and robot spraying chamber.
     
    Feature : Identified workpiece by color lens, with high efficiency identification to classify product. Insert the product information to processor (PLC, robot) to analyze and classify related process. With a high recognition rate, it is available for multiple product mixing production .
     
    Nowadays, robot spraying have became a trend in manufacturing development. Its advantage as following:
     
    A. Robot spraying and transferring system can reduce labor cost, realize industry automatic production .
     
    B. Reduce safety accident, improve
     
    C. The general robot with 6 axis, suitable with the standard related connection action with more than 6 axis, achieve high difficulty and required operation .
     
    4. high temperature curing
     
    Function :heating the powder which on the surface of workpiece to a regulated temperature and timing, then perform melting , levelling and curing to achieve our required standard.
     
    5. Heat source system
     
    Function :we are available to supply natural gas, electricity, biologic pellet fuel etc based on clients" actual condition . Quickly improve the temperature efficiency, matched with curing oven which  adjustable and stable temperature, to achieve improve the product quality.
     
    6. Electronic control systems
     
    Function :the controller installed nearby the equipment, easily to repair and maintenance, perform a central display, a stable operation .
     
    Feature : the equipment available to connect network or utilize 4G telephone card, perform remote data collecting, intelligent monitor, realize industry 4.0.
    remote equipment maintenance and operation monitor, data transmit by internet, data collecting and related statement prepare by IPC.
     
    7. Conveyor system
     
     
    We will design according to workpiece details and clients" required, including plate type conveyor, chain type conveyor, overhead type conveyor etc.
  • Note: above data for reference only, the actual data will be calculated according to customer required.

  • 1.How to purchase?
     
    Please describe the workpiece details to us, like dimension and the
    painting required etc,  we will make out a appropriate painting system and equipment installation proposal to comply with your required.
     
    2. Supporting service
     
    We will offer the whole plant design proposal freely before place order. We are welcome customer visiting the coating line onsite anytime. We will prepare the detailed  technology proposal after get approval between customer and manufacturer. Further we will share information about paint and dedust etc to you.
     
    3. Quotation
     
    The price showing on website is not the real because vary item
     with different price. The final quotation based on two side (customer and manufacturer) confirmed the technology project afterwards.
     
    4. Payment term
     
    The stock & small and middle-sized machine & large equipment & whole coating system deposit by 40%,  the qualified machine before shipping should pay 50% , after installation and training should settle up balance.Actually the payment term can be negotiated according to different situation.
     
    5. Production cycle
     
    We are a professional manufacturer of providing the non-standard coating system. Ensure providing a qualified  product and service, we are setting the production cycle is 60 working days. The actually lead time depends on the recent actually production planning.
     
    6. Package
     
    The default packing for domestic and overseas shipment is with a white color protective film. The export shipment packing would be customized fumigation-free wooden pallet or wooden box.
     
    7. Express & shipping 
     
    Customer can use their own logistic. Otherwise, we will use our long-term cooperation logistic to conduct transport including loading and unloading.The export shipment normally by sea.
     
    8. Installation and training
     
    Customer can arrange staff come to our company receive training if possible. Once the complete coating line start building, we will assign related technician come to onsite to proceed with  until trial production completed. Also , we are pleasure to share information of maintain and technologic if necessary.
     
    9.After-sales service
     
    The main parts of coating system warranty 1 year. Other parts damaged by people or consumable spare parts out of warranty. We are offering full life maintain service and 24 hours online service. The overseas project install charge or occurring related fee should be bear by customer.
     
    Please submit your information as below:
     
    1. What is the size and weigh for your workpiece? Please share the photos with us if possible.
       
    2. How much spraying working time per day?
       
    3. What about your plant size(L * W * H)?
     
    4. What about the frequency of change powder color?
       
    5. How about the heat resource? Natural gas, electricity, biologic pellet fuel?

Write a message to us
Action
I want more details。 Product requirements: Customized: Delivery time: Payment: Shipping: Usage:
((Up to 5 files. supportjpg, jpeg, png, gif, txt, doc, pdf, xls, docx, xlsx, Less than sign5MB))

Contact details and optional details

Submit