Welcome to the official website of Guangdong Chuangzhi Intellingent Equipment Co.,Ltd.

26 years of experience,thousands of cases

Coating equipment solution integrator

Language
Banner
News

NEWS

NEWS CLASSIFICATION

CONTACT

Chairman
Yan Changzhi

Phone:+86 135 8061 6025

Tel:+86 758 6626 158 8063

Add:No.2 Yingbin Avenue, High-tech District, Zhaoqing City, Guangdong Province, China.

Location:
Home
/
/
FAQ Of Drying & Curing Process In The Automatic Spray Line

Details

FAQ Of Drying & Curing Process In The Automatic Spray Line

  • Categories:News Center
  • Author:
  • Origin:
  • Time of issue:2020-04-01
  • Views:
  • Share:

(Summary description)The purpose of drying & curing process in the spray line (no matter for manual or automatic operation )is put the coating attached fixedly on the product surface under a certain condition of time and temperature. In this way there are divide into various heating type, such as by fuel , gas, electricity, steam heating etc. Nowadays a widely application in spray line are electrical and gas heating.

FAQ Of Drying & Curing Process In The Automatic Spray Line

(Summary description)The purpose of drying & curing process in the spray line (no matter for manual or automatic operation )is put the coating attached fixedly on the product surface under a certain condition of time and temperature. In this way there are divide into various heating type, such as by fuel , gas, electricity, steam heating etc. Nowadays a widely application in spray line are electrical and gas heating.

  • Categories:News Center
  • Author:
  • Origin:
  • Time of issue:2020-04-01
  • Views:
Information

The purpose of drying & curing process in the spray line (no matter for manual or automatic operation )is put the coating attached fixedly on the product surface under a certain condition of time and temperature. In this way there are divide into various heating type, such as by fuel , gas, electricity, steam heating etc. Nowadays a widely application in spray line are electrical and gas heating.

 

1.A over high temperature occur on the surface of drying & curing furnace.
A poor insulation as well as the temperature of furnace body and related moisture out of standard totally caused by the unproperly material usage. In addition ,it lead to a higher consumption amount. (The general outer wall not acceptable over 15℃and it should keep have a efficiently insulation)

 

2. A unqualified installation of waste air exhaust pipeline.
Some of waste air exhaust pipeline in the drying & curing furnace which doesn’t connect with outside , in this condition the waste air emission into inside of workshop and then cause air pollution. Similarly some of either doesn’t set up to the position where with a high volume concentration of waste air ,it is not advantage to waste air emission rapidly.
To prevent air accumulation in one place, the proper place for exhaust pipeline should be installed the position where can generate a big amount concentration by waste air.
The product after sprayed will go to the next process for drying & curing. Due to the coating contain a varying degrees organic solvent existing as well as the organic solvent with flammability feature, and the waste air accumulated to a certain amount which doesn’t not discharge promptly, it will easily cause a serious safety accident.

 

Chuangzhi Coating designed and manufactured a series of drying & curing furnace suitable to all kinds of spray line base on actual workplace and process requirement. our compact design furnace such as hanging type, support type, straight type, rotatory type, bridge type, flat type and horizontal type, and they are leading a trend in the spray painting market no matter for domestic or abroad. A advanced drying & curing furnace should be heating evenly, low temperature tolerance, a wide range heating efficiency, easily maintenance and management and a competitive investment for customer.

Keyword:

Scan the QR code to read on your phone

RELATED NEWS

Pre
1
LOGO

It owns Guangdong Chuangzhi Machinery Equipment Co., Ltd., Guangdong Chuangzhi Software Information Technology Co., Ltd., and Hong Kong Chuangzhi Engineering Co., Ltd. has obtained 101 patents in the field of coating equipment and environmental protection equipment. 

CONTACT US

Tel:+86 758 6626 158 8063

Phone:+86 135 8061 6025

Fax:+86 758 6626 539

Address:No.2 Yingbin Avenue, High-tech District, Zhaoqing City, Guangdong Province, China.

MESSAGES

留言应用名称:
客户留言
描述:

验证码

Provide customers with all kinds of non-standard coating production lines, coating equipment, environmental protection equipment and other overall solutions. At present, they have been widely recognized in the auto parts industry, furniture industry, musical instrument industry, cookware industry, home appliance industry, hardware industry and other fields. He used to be Honda, BYD, Wuzhou Dragon, Lizhong Wheel, Meishan.   Provide customers with all kinds of non-standard coating production lines, coating equipment, environmental protection equipment and other overall solutions. At present, they have been widely recognized in the auto parts industry, furniture industry, musical instrument industry, cookware industry, home appliance industry, hardware industry and other fields. He used to be Honda, BYD, Wuzhou Dragon, Lizhong Wheel, Meishan.

  Copyright © Guangdong Chuangzhi Intellingent Equipment Co.,Ltd.   粤ICP备17101617号

Suspended