Welcome to the official website of Guangdong Chuangzhi Intellingent Equipment Co.,Ltd.

26 years of experience,thousands of cases

Coating equipment solution integrator

Language
Banner
News

NEWS

NEWS CLASSIFICATION

CONTACT

Chairman
Yan Changzhi

Phone:+86 135 8061 6025

Tel:+86 758 6626 158 8063

Add:No.2 Yingbin Avenue, High-tech District, Zhaoqing City, Guangdong Province, China.

Location:
Home
/
/
What should I do if the car body cover stripes appear in the trial production process of the automobile coating production line?

Details

What should I do if the car body cover stripes appear in the trial production process of the automobile coating production line?

  • Categories:News Center
  • Author:Chason
  • Origin:Attractivechina
  • Time of issue:2021-01-29
  • Views:
  • Share:

(Summary description)During the trial production process of the automobile coating production line, it was found that a few car bodies had irregular stripes on the horizontal surface (cover, roof). With the increase in the number of passing cars, the streak phenomenon has become serious. Regardless of the vehicle type, almost 90% of the passing cars have streaks. All horizontal surfaces such as the machine cover need to be polished, which seriously affects production efficiency.

What should I do if the car body cover stripes appear in the trial production process of the automobile coating production line?

(Summary description)During the trial production process of the automobile coating production line, it was found that a few car bodies had irregular stripes on the horizontal surface (cover, roof). With the increase in the number of passing cars, the streak phenomenon has become serious. Regardless of the vehicle type, almost 90% of the passing cars have streaks. All horizontal surfaces such as the machine cover need to be polished, which seriously affects production efficiency.

  • Categories:News Center
  • Author:Chason
  • Origin:Attractivechina
  • Time of issue:2021-01-29
  • Views:
Information

During the trial production process of the automobile coating production line, it was found that a few car bodies had irregular stripes on the horizontal surface (cover, roof). With the increase in the number of passing cars, the streak phenomenon has become serious. Regardless of the vehicle type, almost 90% of the passing cars have streaks. All horizontal surfaces such as the machine cover need to be polished, which seriously affects production efficiency.

1. Description of the phenomenon of car body cover stripes appearing in the trial production process of the automobile coating production line
Abnormal body streaks occur in all vehicles that cross the line. They are irregular and almost all of them appear. In severe cases, the occurrence rate is as high as 90%. The streaks that appeared during the trial production of the automobile coating production line mainly appeared on the horizontal surface such as the engine hood and the roof, and there were also a small amount on both sides. The appearance of the stripes on the engine hood is like the traces left by the paint film being swept by a brush. The direction is not fixed, the phosphating visually has micro stripes, the electrophoretic wet film has a bumpy touch, and the stripes on both sides are similar to the stripes in the groove.

2. The reason and analysis of car body cover stripes appearing during trial production of automobile coating production line
The cause of the car body stripe defects was investigated, and the results are listed in Table 5. Experiments 2 to 6 show that the pretreatment may cause abnormal streaks. It can be seen from experiments 1 and 9 that whiteware, electrophoresis and washing after electrophoresis are less likely to cause abnormalities. Check the pre-treatment spray cycle status, and no obvious abnormality was found. By checking the pre-treatment test parameters and comparing the data of the first phase, it was found that the p H of the pre-treatment washing 3 was close to 4.0, corresponding to the old production line, the p H of the washing 3 was all> 5.0. This parameter of the new line is low. The industrial water replacement for water wash 3 will improve the stripes, indicating that water wash 3 is more likely to cause abnormal stripes.

3. Solutions to the streaks of the body cover during the trial production of the automobile coating production line
In order to ensure that the p H of wash 3 is maintained at a level> 5.0, the water supplement valve needs to be opened to replenish water overflow for wash 3 when passing the vehicle, and reverse vehicle passing verification is performed. See Table 7 for the verification of the third wash water supplement. Wash 3 After the water supply valve is closed for 10 minutes, p H gradually decreases to below 5.0, corresponding to the appearance of streaks on the body. After opening the water replenishment valve, p H rises to above 5.0, the body streaks gradually improve, and the paint surface returns to normal. It shows that the p H of the first wash after phosphating, that is, wash 3, is directly related to the car body stripes, and the p H of the washing tank liquid is controlled to be above 5.0 to ensure normal car body paint film quality.

Keyword:

Scan the QR code to read on your phone

RELATED NEWS

Pre
1
LOGO

It owns Guangdong Chuangzhi Machinery Equipment Co., Ltd., Guangdong Chuangzhi Software Information Technology Co., Ltd., and Hong Kong Chuangzhi Engineering Co., Ltd. has obtained 101 patents in the field of coating equipment and environmental protection equipment. 

CONTACT US

Tel:+86 758 6626 158 8063

Phone:+86 135 8061 6025

Fax:+86 758 6626 539

Address:No.2 Yingbin Avenue, High-tech District, Zhaoqing City, Guangdong Province, China.

MESSAGES

留言应用名称:
客户留言
描述:

验证码

Provide customers with all kinds of non-standard coating production lines, coating equipment, environmental protection equipment and other overall solutions. At present, they have been widely recognized in the auto parts industry, furniture industry, musical instrument industry, cookware industry, home appliance industry, hardware industry and other fields. He used to be Honda, BYD, Wuzhou Dragon, Lizhong Wheel, Meishan.   Provide customers with all kinds of non-standard coating production lines, coating equipment, environmental protection equipment and other overall solutions. At present, they have been widely recognized in the auto parts industry, furniture industry, musical instrument industry, cookware industry, home appliance industry, hardware industry and other fields. He used to be Honda, BYD, Wuzhou Dragon, Lizhong Wheel, Meishan.

  Copyright © Guangdong Chuangzhi Intellingent Equipment Co.,Ltd.   粤ICP备17101617号

Suspended